Dents and distorts trough sections, restricts flow, and over time weakens the fastener attachment points along the roofline.
Alu-Rex Gutter Guard Calgary
Alu-Rex is a Canadian manufacturer that makes perforated aluminum gutter protection systems designed to keep debris out of the eavestrough permanently.
Over
15
years in Calgary
Stop Managing the Problem. Fix It Once.
Alu-Rex is a Canadian manufacturer that makes perforated aluminum gutter protection systems designed to keep debris out of the eavestrough permanently. Their products do not just filter debris. They also structurally reinforce the gutter against the weight of snow and ice, which is a specific problem in Calgary’s climate that standard gutter guards do not address.
Chinook Exteriors is a certified Alu-Rex installer. Certification is a prerequisite for the manufacturer’s warranty. An Alu-Rex product installed by a non-certified contractor does not carry the warranty, regardless of what you paid. We have been installing Alu-Rex systems across Calgary since 2011 and bring long-standing eavestrough experience to each project.
Free inspection and written estimate for Alu-Rex installation in Calgary.
Call: 587-999-7170 or book at chinookexteriors.ca
Why Gutter Guards Matter More in Calgary Than Most Cities
Opens joint sealant, works fasteners loose, and puts repeated stress on every connection point in the system.
Dead weight on the trough that standard spike-and-bracket systems were not designed to handle repeatedly over a 20-year lifespan.
The most direct path to ice dams. A full trough going into freeze-up holds water that refreezes at the eaves, backs up under the shingles, and damages the roof edge and fascia.
Rapid thaw-refreeze events that stress any weak point in the system, particularly joints and hardware connections.
T-Rex Continuous Hanger
The T-Rex is designed for new eavestrough installations. It replaces the traditional fastening method, where gutters are hung on individual spikes or brackets spaced every 12 to 18 inches along the run. Instead, the T-Rex acts as a continuous hanger, securing the gutter along its full length with no gaps or weak points.
The leaf guard is built into the hanger system, which means the gutter installation and the gutter protection happen in a single step. There is no separate cover to install afterward and no gaps where debris can enter between hanger positions.
- Lifetime sturdiness warranty on the hanger
- 25-year clog-free warranty
- Rated to 250 lbs per linear foot
- Self-sealing screws prevent water infiltration at fastener points
- Fits 5-inch and 6-inch eavestroughs
- Warranty valid only through certified installers
Gutter Clean System
The Gutter Clean System is designed for existing eavestroughs. It is a perforated aluminum cover that installs over your current trough, sealing the front and back edges of the opening. Leaves, seeds, and debris land on the surface and blow or wash away rather than falling into the gutter. Water drains through the perforations into the trough below.
Alu-Rex's published test data rates the Gutter Clean System at 29.7 inches of water per hour, which exceeds the heaviest rainfall Calgary has recorded. It also protects the eavestrough structure from the weight of snow and debris sitting on top, and prevents ice from expanding inside the trough during freeze-thaw events.
- 40-year clog-free warranty
- Drains 29.7 inches of water per hour per Alu-Rex's published testing
- Will not rust, crack, chip, or warp
- UV and weather resistant aluminum construction
- Fits 5-inch and 6-inch eavestroughs
- Warranty valid only through certified installers
T-Rex vs Gutter Clean System: Full Comparison
What it is
- T-Rex Continuous Hanger: Continuous fastening system with built-in leaf guard, installed on new gutters
- Gutter Clean System : Perforated aluminum cover installed over your existing eavestroughs
Best for
- T-Rex Continuous Hanger: New gutter installations or full replacements
- Gutter Clean System : Existing gutters that are in good condition
How it works
- T-Rex Continuous Hanger: Replaces traditional spikes and brackets. Secures the gutter along its full length. Built-in perforated cover blocks debris in one installation step.
- Gutter Clean System : Clips over the existing trough, sealing the front and back. Debris sits on top and blows or washes off. Water drains through the perforations.
Strength
- T-Rex Continuous Hanger: Rated to 250 lbs per linear foot. Continuous support prevents warping under snow and ice load.
- Gutter Clean System : Reinforces the eavestrough against weight from snow and debris sitting on top. Will not fall into the trough.
Drainage capacity
- T-Rex Continuous Hanger: Drains 29.7 inches of water per hour per Alu-Rex's published testing
- Gutter Clean System : Drains 29.7 inches of water per hour per Alu-Rex's published testing
Clog-free warranty
- T-Rex Continuous Hanger: 25-year clog-free warranty
- Gutter Clean System : 40-year clog-free warranty
Manufacturing warranty
- T-Rex Continuous Hanger: Lifetime sturdiness warranty on the hanger
- Gutter Clean System : UV and weather resistant aluminum. Will not rust, crack, chip, or warp.
Fits
- T-Rex Continuous Hanger: 5-inch and 6-inch eavestroughs
- Gutter Clean System : 5-inch and 6-inch eavestroughs
Warranty valid?
- T-Rex Continuous Hanger: Only through certified installers. Chinook Exteriors is certified.
- Gutter Clean System : Only through certified installers. Chinook Exteriors is certified.
Not sure which system is right for your home? We assess your existing eavestroughs at the free inspection and recommend the appropriate product based on the system condition, age, and whether replacement is already on the horizon. If your eavestroughs are overdue for replacement anyway, adding T-Rex at the same time costs a fraction of installing it separately later.
Does your eavestrough need replacement? See our eavestrough replacement service.
Why We Use Alu-Rex and Not Other Gutter Guard Systems
Alu-Rex’s perforated aluminum design is specifically engineered to avoid this. The perforation size balances debris filtration against water flow. Debris that lands on the surface dries out and blows away rather than accumulating. Alu-Rex backs the Gutter Clean System with a 40-year clog-free warranty.
The structural benefit is also specific to their design. Most gutter guards are decorative covers that sit on top of the gutter. The T-Rex is structural hardware that replaces the entire fastening system. The Gutter Clean System reinforces the existing trough against deformation. These products are doing two jobs simultaneously.
How Alu-Rex Installation Works With Chinook Exteriors
We inspect your existing eavestroughs: overall condition, slope, joint integrity, and fastener attachment. If your gutters are in good shape and just need debris protection, the Gutter Clean System is the right call. If they are due for replacement or if you are installing new gutters, the T-Rex is the better investment. You get a written estimate for the recommended system before any work begins.
T-Rex installations happen during new eavestrough fabrication, as the hanger is installed before the gutter is lifted into position. Gutter Clean System installations go over existing troughs, typically in one visit. Both systems fit the 5-inch and 6-inch aluminum eavestroughs found on most Calgary homes.
You receive written warranty documentation from both Alu-Rex (product warranty) and Chinook Exteriors (10-year installation warranty). Alu-Rex’s product warranties are transferable if you sell the home, which adds tangible value to the property. Keep the documentation on file.
What Does Alu-Rex Installation Cost in Calgary?
Gutter guard installation is priced per linear foot, based on the total run of eavestrough being covered. Most Calgary homes have 150 to 200 linear feet. The Gutter Clean System retrofits onto existing gutters, so the installation is typically one visit with minimal setup. The T-Rex is installed as part of a new eavestrough job, so the cost is bundled with the eavestrough installation.
Gutter Clean System (on existing eavestroughs): $5 to $10 per linear foot installed, depending on system size and accessibility. Most Calgary homes see a total cost of $750 to $2,000 for a full installation.
T-Rex (on new eavestrough installation): Added to the cost of new eavestrough installation, typically $2 to $5 per linear foot over the base eavestrough price. Installing at the same time as new gutters is significantly cheaper than adding it later.
These are working ranges, not quotes. The only accurate number comes after a free inspection of your specific system. We provide a written, itemized estimate before any work begins.
For homeowners comparing the annual cost of gutter cleaning against the one-time cost of Alu-Rex installation: at typical Calgary cleaning rates and twice-yearly frequency, most homeowners recover the Alu-Rex installation cost within five to eight years. After that, the system keeps working without ongoing expense.
Why Choose Chinook Exteriors for Alu-Rex Installation in Calgary
Alu-Rex Certified Installer Product warranty coverage depends on the system selected and manufacturer installation requirements.
Experienced Calgary eavestrough installer with a focus on clear estimates, product fit, and clean installation.
We assess your existing gutters properly before recommending T-Rex or Gutter Clean System. If your gutters need replacing anyway, we tell you that rather than installing a guard on a system about to fail.
Continuous accreditation for over a decade. Not a recent run of good reviews.
10-year installation warranty Covers our workmanship on top of the Alu-Rex product warranty.
Full coverage on every job. You are not liable if something goes wrong on your property.
Price quoted is price charged Written estimate before work begins. No surprises.
Owner-led standards Project communication from inspection to completion.
Calgary & Surrounding Areas We Serve
Calgary NW
- Tuscany
- Rocky Ridge
- Hamptons
- Sage Hill
- Citadel
- Evanston
Calgary NE
- Skyview Ranch
- Cornerstone
- Coventry Hills
- Panorama Hills
- Taradale
Calgary SW
- Evergreen
- Bridlewood
- Aspen Woods
- Signal Hill
- West Springs
Calgary SE
- Mahogany
- Auburn Bay
- Legacy
- Cranston
- McKenzie Lake
Calgary Inner City
- Bridgeland
- Hillhurst
- Kensington
- Mount Royal
- Inglewood
Surrounding Areas
- Airdrie
- Cochrane
- Chestermere
- Okotoks
- High River
- Langdon
Not on the list? Call 587-999-7170 . If you are within a reasonable distance of Calgary, we will confirm coverage before you make any plans.
Get a Free Fascia Estimate in Calgary
Call: 587-999-7170 | chinookexteriors.ca | Calgary, alberta
Frequently asked questions
Alu-Rex Gutter Guard questions, answered
Does it matter which contractor installs Alu-Rex?
Yes, significantly. Both the T-Rex and the Gutter Clean System warranties are only valid when installed by an Alu-Rex certified contractor. If a non-certified installer puts in the product, the manufacturer’s warranty does not apply. Ask to see certification documentation before booking any contractor for Alu-Rex work. Chinook Exteriors is certified and can provide documentation on request.
Do gutter guards actually work in Calgary winters?
Alu-Rex products are specifically designed for Canadian winters, not adapted from products built for milder climates. The Gutter Clean System prevents the trough from filling with debris going into freeze-up, which is the main driver of ice dam formation at the eaves. The perforated aluminum construction handles snow loading without deforming, and both products are UV-resistant, meaning they do not degrade in Calgary’s summer sun the way plastic and foam guards do.
My eavestroughs are only a few years old. Do I need the T-Rex or the Gutter Clean System?
If your eavestroughs are in good condition and draining properly, the Gutter Clean System is the right choice. It installs over your existing gutters in one visit. T-Rex is only for new gutter installations. We assess your system at the free inspection and tell you honestly which product is appropriate.
Will gutter guards void my roof warranty?
Professionally installed Alu-Rex products do not affect your roofing warranty. Neither the T-Rex nor the Gutter Clean System requires lifting or cutting shingles. The T-Rex fastens to the gutter using self-sealing screws. The Gutter Clean System clips over the existing trough. No shingle contact is required.
How much maintenance do Alu-Rex gutter guards require?
Very little. Leaves and debris land on the surface, dry out, and blow away in wind. You may see some accumulation after heavy leaf fall near large trees, but it clears on its own in most cases. The manufacturer recommends an annual inspection to confirm the system is performing as expected. Chinook Exteriors can include this in a standard seasonal maintenance visit.
Get in touch
Talk to a Calgary exterior contractor
Locally owned and operated since 2011, serving all Calgary quadrants and the surrounding communities.
Phone: 587-999-7170
Email: chinookexteriors@gmail.com
Product lines & profiles
Exterior products and third-party profiles
Chinook Exteriors Inc. works with established exterior product lines and maintains public business profiles for homeowners to review.
Need Alu-Rex Gutter Guard in Calgary?
Free, no-obligation estimates. BBB A+ accredited since 2011.
Get a free estimate